Security_Elevate

SD Cloud upgraded on 7/13 and I have had big issues with device configuration. I can't view it, can't resolve it with SRX CLI ...

Hi all. I have managed to get locked out of Juniper Security Director Cloud because my Microsoft Authenticator became FUBAR. ...

Without a config snipet it is hard to say, state "Active" means it is trying to establish TCP connection on Port 179 1) do ...

try adding set interfaces ge-0/0/0 vlan-stacking also do you have security policies and zones setup? Does your ISP expect ...

Hi Sutiranan as it is a firewall, yes, you always need the security configs, do you have the zones and policies setup?

Hello, we are using JSC for a few years with a SRX340. Yesterday we've upgrade from 23.4R2.13 to 23.4R2-S5 without changing ...

Hi, counterintuitively this set command is not a config mode command, but an operational mode command. So no need to 'edit' ...

I removed an old, and unused VPN from Security Director and then had to remove some of the config manually, per JTAC support. ...

Hi Arun, A couple of things for you to look at... 1. This will depend on your connections, but I suspect that your IP Monitoring ...

Hi Goran, There are some differences between the Branch and Mid-Range SRXs when it comes to IPSEC VPN configurations. Can you ...