Wireless Access

 View Only

  • 1.  AP Flag( ID )

    Posted May 10, 2021 06:08 AM
    Hello,

    When i tried to assign AP-103 to Aruba controller manually with different VLAN i get Flag ID, what is the problem.

    Thanks

    ------------------------------
    Mahmoud Marie
    ------------------------------


  • 2.  RE: AP Flag( ID )

    Posted May 10, 2021 08:41 AM
    D typically means that some traffic between the AP and the MD are blocked or cannot pass.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



  • 3.  RE: AP Flag( ID )

    Posted May 10, 2021 10:11 AM
    I = Inactive; D = Dirty config; and what Colin mentioned is the issue in general, no communication between the AP and controller which also could be a routing issue.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------



Related Content