Hi all,
I try to use ArubaOS-CX with GNS3
I followed the documentation available
I'm using an ESXI server 6.5, where i load the GNS3 VM
I setup correctly my GNS3 and imported this file to setup my appliance
I load the image file on the Remote VM ESXI
"name": "ArubaOS-CX Simulation Software",
"category": "multilayer_switch",
"description": "The ArubaOS-CX Simulation Software is a virtual platform to enable simulation of the ArubaOS-CX Network Operating System. Simulated networks can be created using many of the protocols in the ArubaOS-CX Operating system like OSPF, BGP (inc. EVPN). Key features like the Aruba Network Analytics Engine and the REST API can be simulated, providing a lightweight development platform to building the modern network.",
"vendor_name": "HPE Aruba",
"vendor_url": "arubanetworks.com",
"product_name": "ArubaOS-CX Simulation Software",
"registry_version": 4,
"status": "stable",
"availability": "service-contract",
"maintainer": "Aruba",
"maintainer_email": "vincent.giles@hpe.com",
"usage": "Default username admin has to be set at first login.",
"symbol": ":/symbols/route_switch_processor.svg",
"first_port_name": "mgmt",
"port_name_format": "1/1/{port1}",
"qemu": {
"adapter_type": "virtio-net-pci",
"adapters": 8,
"ram": 4096,
"cpus": 2,
"hda_disk_interface": "ide",
"hdb_disk_interface": "ide",
"hdc_disk_interface": "ide",
"arch": "x86_64",
"console_type": "vnc",
"kvm": "require",
"options": "-nographic",
"process_priority": "normal"
},
"images": [
{
"filename": "arubaoscx-disk-image-genericx86-p4-20200311173823.vmdk",
"version": "10.04.1000",
"md5sum": "8ee483412651665621bb4c94a56bdedd",
"filesize": 356249088,
"download_url": "https://asp.arubanetworks.com/"
},
{
"filename": "arubaoscx-disk-image-genericx86-p4-20180712161119.vmdk",
"version": "10.01.0001",
"md5sum": "2e48b8b833a95e1c786532dcc3fdccf3",
"filesize": 287734784,
"download_url": "http://support.arubanetworks.com/"
}
],
"versions": [
{
"name": "10.04.1000",
"images": {
"hda_disk_image": "arubaoscx-disk-image-genericx86-p4-20200311173823.vmdk"
}
},
{
"name": "10.01.0001",
"images": {
"hda_disk_image": "arubaoscx-disk-image-genericx86-p4-20180712161119.vmdk"
}
}
]
}
I load the image file on the Remote VM ESXI ,
And then i start an new projetc , i put my ARUBA OS CX switchs and turn them to On ,
But when i launch the console wth tight vnc , i see that the system is not find finding any bootable device

Here is my setup
GNS3 preference
10.10.64.156 is my ESXI server where the GNS3 VM is running

I had it in REmote server too but not sure if it's usefull or not

Then Qemu setup



I really need to use the remote server as my computer is not enough powerfull to lauch so much VM , my ESXI server is much stronger
I'm using TCP 80 port because firewalls are beetween My computer and laptop ,
Please i really need advice and help on this, i read everything on internet but it doesn't help me much , everybody is like using local VM but it's not very confortable
Does somebody already runs it on remote server Esxi ?
Best Regards
------------------------------
Vicky GAUDIN
------------------------------