Wired Intelligent Edge

 View Only
Back to discussions
Expand all | Collapse all

Commit failed when applying ACL to VLAN

This thread has been viewed 0 times

  • 1.  Commit failed when applying ACL to VLAN

    Posted Feb 20, 2014 09:46 AM

    Hi,

     

    On a newly updated HP 5412 I've made a new access list.

     

    When I try to apply it to a VLAN, i get the error: "Commit failed."

    Any idea why and where to start investigate?

     

    The purpose of the ACL is to allow 192.168.30.136 to talk to 172.16.100.0/24

     

    Here is the ACL:

     

    Access Control Lists

    Name: LIST-100-NETADM-IN
    Type: Extended
    Applied: No

     

    SEQ Entry
    -----------------------------------------------------------------------------
    20 Action: permit
    Src IP: 192.168.30.136 Mask: 0.0.0.0 Port(s):
    Dst IP: 172.16.100.0 Mask: 0.0.0.255 Port(s):
    Proto : IP
    TOS : - Precedence: -

     

    100 Action: deny
    Src IP: 0.0.0.0 Mask: 255.255.255.255 Port(s):
    Dst IP: 0.0.0.0 Mask: 255.255.255.255 Port(s):
    Proto : IP
    TOS : - Precedence: -

     

     

    And the command which fails:

    # vlan 100 ip access-group "LIST-100-NETADM-IN" in
    Commit failed.

     

     

    Br,

    Thomas


    #ACLs


  • 2.  RE: Commit failed when applying ACL to VLAN

    Posted Feb 21, 2014 12:02 PM

    Hi, you shouldn't need to put the quotes around your ACL name when you try to add it to the VLAN, otherwise you should be good.



Related Content