Wired Intelligent Edge

 View Only

  • 1.  DHCP Aruba 2930f 2th and 3th pool not working

    Posted Dec 10, 2020 09:20 PM

    There are any vlans and created a DHCP address pool for them.
    Only pool 51 works, but 52 and 53 do not work.

    ---
    dhcp-server pool "51"
    authoritative
    default-router "192.168.51.1"
    dns-server "8.8.8.8,8.8.4.4"
    lease 00:01:00
    network 192.168.51.0 255.255.255.0
    range 192.168.51.50 192.168.51.200
    exit
    dhcp-server pool "52"
    authoritative
    default-router "192.168.52.1"
    dns-server "8.8.8.8,8.8.4.4"
    lease 00:01:00
    network 192.168.52.0 255.255.255.0
    range 192.168.52.50 192.168.52.200
    exit
    dhcp-server pool "53"
    authoritative
    default-router "192.168.53.1"
    dns-server "8.8.8.8,8.8.4.4"
    lease 00:01:00
    network 192.168.53.0 255.255.255.0
    range 192.168.53.50 192.168.53.200
    exit

    -----

    and

    vlan 51
    name "Work LAN"
    untagged 5,15
    tagged 13,25
    ip address 192.168.51.1 255.255.255.0
    dhcp-server
    exit
    vlan 52
    name "WiFi Work"
    untagged 14,16
    tagged 13,21,25
    ip address 19.168.52.1 255.255.255.0
    dhcp-server
    exit
    vlan 53
    name "WiFi Guest"
    tagged 13,21,25
    ip address 192.168.53.1 255.255.255.0
    dhcp-server
    exit

    What could be the reason?



    ------------------------------
    Vladimir Vasiliev
    ------------------------------


  • 2.  RE: DHCP Aruba 2930f 2th and 3th pool not working

    Posted Dec 11, 2020 08:27 AM
    Hi Vladimir, what do you mean when you wrote "Only pool 51 works, but 52 and 53 do not work."?​ DHCP IP Pools appear as correctly configured...are you meaning that clients are not receiving IP addressing on VLAN 52 and 53 while on VLAN 51 is all OK? please specify.

    ------------------------------
    Davide Poletto
    ------------------------------



  • 3.  RE: DHCP Aruba 2930f 2th and 3th pool not working

    Posted Dec 11, 2020 08:35 AM

    Hi Davide

    Yes, exactly. I don't get addresses in 52 and 53 pools. Only at 51.

    Vladimir



    ------------------------------
    Vladimir Vasiliev
    ------------------------------

    Original Message


  • 4.  RE: DHCP Aruba 2930f 2th and 3th pool not working

    Posted Dec 13, 2020 08:14 AM
    What do you have on the log ?

    do you have try a pcap capture ?

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------

    Original Message


Related Content