Wireless Access

 View Only
  • 1.  How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 11, 2023 06:44 AM

    How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour .Is it normal ?

    I tried 8.3 and 8.6 ,all the same result . Most of the time was spend on initializing fpapps  ,about one hour. But when it start ,everything is ok .



  • 2.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 11, 2023 11:49 AM
    Edited by SE-28779c Mar 11, 2023 11:55 AM

    I just rebooted my 7010 (Version 8.10.0.5 LSR) with a basic configuration... 4 minutes to reboot.

    Check your storage to ensure that it's useable...

    show storage

    Filesystem                Size      Used Available Use% Mounted on
    /dev/usb/flash3           1.5G    740.0M    690.9M  52% /flash
    /dev/usb/flash3           1.5G    740.0M    690.9M  52% /flash/apimages

    When I deploy 72xx controllers, I don't have extended outages during reboots, ~5 mins.

    You may want to open a TAC case to have the system checked also.



  • 3.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 11, 2023 07:07 PM

    Seems ok  for the storage .The config is simple too ,only setup a WLAN and no other rules. My device is just out of service. So I came here  see if someone can help me .




  • 4.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 11, 2023 06:09 PM

    I work mostly with minimum 7030 or 72xx controllers so it can be depends on the model but 10 minutes is normal. One hour sound really long and also sugest to open a TAC case.



    ------------------------------
    Marcel Koedijk | MVP Expert 2023 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
    ------------------------------



  • 5.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 12, 2023 07:13 AM

    I remember one of my customers have 2x7005 controllers and the boot-time is normal 5-10minutes. FPAPP is responsible for the L2/L3 switching part of the controller. Maybe you can dig into the "show inventory" and find some issue there?

    Maybe this topic helps you: https://community.arubanetworks.com/community-home/digestviewer/viewthread?MID=22137



    ------------------------------
    Marcel Koedijk | MVP Expert 2023 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
    ------------------------------



  • 6.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 12, 2023 07:38 AM

    I downgrade to 6.5.3 ,it only take 3 minutes to reboot .There is an error See below image. 




  • 7.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 12, 2023 07:45 PM

    Hi, when you get that error just load/upgrade the OS again.  Use the cli to do it if you can't open the GUI.

    I hope this helps.




  • 8.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 12, 2023 08:52 PM

    Yes ,error message resloved by secondly upgrade . Now the issue is still take 1 hour to boot while I use AOS 8.3 or 8.6 .    6.5 only take 10 minutes.




  • 9.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 13, 2023 07:54 AM

    Hi, is the controller connected to the network? can you share the vlan of the controller IP and the ports configuration? 




  • 10.  RE: How long does your Aruba 7010 take to reload ? Mine will take more than 1 hour

    Posted Mar 13, 2023 08:37 AM
      |   view attached

    Yes ,it connect to the nework .Only set the ip address .Vlan 1  .very simple configuration .

    See detail 


    Attachment(s)

    txt
    cfg.txt   27 KB 1 version