Comware

 View Only
Expand all | Collapse all

Link Aggregation between H3C and GBe2c Blade Switches (Nortel Based)

This thread has been viewed 0 times
  • 1.  Link Aggregation between H3C and GBe2c Blade Switches (Nortel Based)

    Posted May 07, 2013 04:15 AM

    Hi, i`ve didn`t manage to get an Link Aggregation between H3C S5500-EI (Comware based) and GBe2c L2/3 Blade Switches (Nortel based) to work.

    Dynamic (LACP) didn't work at all (no synchronization) and Static works, if the Ports on the H3C are in Access Mode (with an single untagged VLAN), but with Ports in Trunk mode (to get some tagged VLANs through) the channel quits and i have no access any longer... Has anyone got an Channel (dynamic or static) between 3com and GBe2c to work?

     

    Any help appreciated.

     

    Thank You



  • 2.  RE: Link Aggregation between H3C and GBe2c Blade Switches (Nortel Based)

    Posted May 10, 2013 04:41 AM

    Hi Bernd

     

    I don't think Link Aggregation it the problem, because LinkAggregation don't cares about VLAN's. Is is possible to establish a VLAN Trunk, if only one link is connected?

     

    br

    Manuel