Comware

 View Only
  • 1.  Mitel VOIP VLAN Solution

    Posted Apr 24, 2007 03:53 AM
    Could someone please help? I am implementing a VOIP solution and the customer wants to piggy back their pcs from the phones. Currently there are two VLANs configured. One for Voice and One for Data. I know you can't have a port with two untagged vlans but i cannot get both PC and Phone to connect to network at same time.


  • 2.  RE: Mitel VOIP VLAN Solution

    Posted Apr 24, 2007 04:23 AM
    Michael

    You will need to run the data VLAN untagged to the phone, and the Voice data as tagged. Also your DHCP scope will need to return the necessary Mitel options within the data VLAN for the phones to boot correctly.

    Don't forget to match the Mitel QoS priority on the Voice VLAN!


  • 3.  RE: Mitel VOIP VLAN Solution

    Posted Apr 24, 2007 06:57 AM
    Hi

    And also don;t forget to match the VoIP Vlan ID on the Switch with the one on the Phones.

    Good Luck !!!


  • 4.  RE: Mitel VOIP VLAN Solution

    Posted Apr 27, 2007 05:16 AM
    For your network ensure all phone/pc ports are tagged voip untagged data and all uplinks are tagged for both.
    You may also want to put a statement in the voice vlan similar to "qos dscp 101110" (in this case priority 7)
    On DHCP you want to create options 128-133
    128 Mitel VOIP:RTC
    type IP
    IP of phone controller
    129 MITEL VOIP:TFTP server
    same as above
    130 PHONE ID TAG
    string
    MITEL IP PHONE
    131 VOICE QUALITY MONITOR
    IP (if used)
    132 VLAN (this is critical)
    type LONG
    vlan # (in windows DHCP this is a HEX value )ie 0x12c for 300
    133 PRIORITY
    type LONG
    priority in hex ie 0x7


  • 5.  RE: Mitel VOIP VLAN Solution

    Posted Apr 29, 2007 10:47 PM
    Thanks for your replies. I tried all that this weekend but still could not get this working. there were some Netgear POE switches on site which were powering the phone. I think if it was only HP this solution would have worked.


  • 6.  RE: Mitel VOIP VLAN Solution

    Posted Jan 12, 2010 05:53 PM
    Rob,

    How do I enter the options in the dhcp scope, as my scopes options do not have anything between 76 to 200 something.

    I would like to enter them but see no way.