Wireless Access

 View Only
  • 1.  MSM 760 Controller

    Posted Oct 28, 2013 04:41 PM

    Trying to get the System log events cleared up on the Controler.

     

    System log shows the following: 

     

    Are these issues that should be addressed and fixed?

     

    Oct 28 15:27:42.436 warn 74:46:A0:8D:92:AB rfmgr_ap: Radio 2: Severe interference channel proposal rejected: insufficient quality
    Oct 28 14:10:48.025 warn 84:34:97:B6:E4:88 rfmgr_ap: Radio 1 has detected one or more neighbor AP too close, less than 1 meter away, strongest received signal level is 170 dBm, threshold is 0 dBm
    Oct 28 13:46:47.556 warn 84:34:97:B6:5D:7B rfmgr_ap: Radio 2: Severe interference channel proposal rejected: insufficient quality
    Oct 28 13:31:12.252 warn 84:34:97:B6:5D:7B rfmgr_ap: Radio 2: Severe interference channel proposal rejected: insufficient quality
    Oct 28 12:27:31.114 err 84:34:97:B6:E4:3D eapolserver: Invalid state for processing a WPA Group key (mac-address='10:0B:A9:B9:8B:FC').



  • 2.  RE: MSM 760 Controller

    Posted Oct 30, 2013 10:28 AM

    That log is coming from the Severe interference detection/mitigation feature, which can be enabled/disabled at the AP radio settings.

     

    When the AP detects quality degradation on its current channel, it will inform the controller and try to move to a different channel, in your case it looks like the proposed channel wasn´t good enough (probably interference).

     

    Thanks,

    Lmm



  • 3.  RE: MSM 760 Controller

    Posted Oct 31, 2013 01:55 PM

    What release are you running ?

     

    Seems to me 5.7.3.0 SR2 is a quite stable release.

    Might want to start there.

     



  • 4.  RE: MSM 760 Controller

    Posted Oct 31, 2013 02:43 PM

    Firmware version: 6.0.1.0-13564

    MSM 760 Controller



  • 5.  RE: MSM 760 Controller

    Posted Nov 01, 2013 10:34 AM

    Severe interference detection/mitigation is not included in 5.7.X.X code.



  • 6.  RE: MSM 760 Controller

    Posted Nov 05, 2013 10:14 AM

    That isn't a very good version. Start by upgrading to 6.2.