I ordered a bunch of MSR routers with 4G interfaces.
I've put a SIM in one and I now want to develop my standard config for these things.
The LAN interface, VLAN, VRRP config all looks reasonably straightforward so far, but I have a complete blockage on the 4G config.
I've never configured any kind of 4G interface before so I know nothing about it - luckily I know I can rely on HP's doco which is usually very good.
So I have a document called "HPE Flexnetwork MSR Router Series".
I go to Chapter7: Interface Configuration Guides.
Nothing.
Chapter10: Layer2-WAN Access guide
Has a bit in it which is about "Managing a 3G/4G Modem".
(Modems are something from 20 years ago, but maybe this is what they call the 4G module?.)
"Configuring a cellular interface for a 4G modem"
"Enter cellular interface view: controller cellular cellular-number
So I enter controller cellular ?
and it tells me <0-1> Cellular interface number
so I put in 0, or 1, and it tells me % Wrong parameter
So I'm completely confused - anybody here ever configured a 4G interface on an MSR router and can tell me what I'm doing wrong?