Wired Intelligent Edge

Hi All,

Have a new 1930 switch and attempting to set up a VLAN however it is not working as expected. Steps taken create: VLAN 1000 set ports 2 and 3 as untagged members. Connect a computer to each port and the computers (10.1.1.215/24 & 10.1.1.216/24) can not see each other. Change port 2 & 3 membership to be untagged in the default VLAN and the two computers can see each other. Swap the port config back to untagged members on VLAN 1000 and the two computers can not see each other. It doesn't make sense to me, have an initial set up step been missed to allow the switch to support with VLAN tags??

Thanks

Martin.

For Aruba Instant ON products, you may have more success posting in the InstantON forum.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------