Hi Team,
In bit of bind with this one, hope someone can advice further.
Our organization has Aruba SDWAN as a service from service provider that include transport (undelay) links.
In current legacy infra we already have IPv4 and IPv6 and Our organization is planning to implement IPv6 along with IPv4 on SDWAN also.
However, the response that we receive are Aruba will not support segmentation with IPv6 and IPv4 together.
Wanted to check if this is true? If yes, whether Aruba has plan to come up with some solution.
Can we have any specific document for the same.
Thank you so much in advance.
Original Message:
Sent: Mar 09, 2023 10:36 AM
From: Duane Henigin
Subject: NGFW feature licencing and dual stack.
Yes, EdgeConnect can support IPv4 and IPv6
------------------------------
DuaneHenigin
------------------------------
Original Message:
Sent: Mar 08, 2023 06:54 AM
From: Pravin Mulay
Subject: NGFW feature licencing and dual stack.
Thank for the information.
My current WAN infra is setup for dual stack (IP v4 and v6). wanted to know whether SDWAN edge connect will support dual stack solution.
Thank you
Original Message:
Sent: Mar 06, 2023 06:46 AM
From: AH5
Subject: NGFW feature licencing and dual stack.
Hi, I can answer the first question on licensing. We have all the NGFW in the standard SD-WAN bandwidth license. The only features not included is IDS/IPS. You require a separate security license for that. If you check out the link below, it has a breakdown of features and which is license is required.
To review your current licensing you should be able to see this on the main Orchestrator dashboard or under configuration then licences.
https://www.arubanetworks.com/resource/secure-sd-wan-fabric-with-aruba-edgeconnect-enterprise/
Regarding the dual stack question. Do you mean high availability or clustering?