What is the reported channel utilization on the 2.4GHz?
What are the by ARM selected channels and power for the APs?
Do you have broadcast filtering enabled?
You may try to enable 11d/h, some devices work better with that.
Is it just the ringcam that's giving issues?
What firmware version do you run? Have you upgraded to the latest already?
What is the distance between the device and the AP? You may try to increase the 2.4GHz power to see if that makes the connection better. 57 Mbps link speed can be quite low, depending on the device specifications. Your shelly's report 72 Mbps which seems like the maximum they support.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------