Comware

 View Only
  • 1.  V1910 radius server Level privilege

    Posted Mar 31, 2011 07:44 AM

    Authorization while using CS ACS as a RADIUS server does not seem to work with the V1910 switches we are using.

    The VSA for determining privilege levels (representing privilege levels 0 through 3) and is set on my RADIUS server... I see in the logs that it's passing this attribute back to the switch.  However, no matter what I set this value to I am always at privilege level 0 when I authenticate against the RADIUS server.

     

    Does anybody know how to fix it?



  • 2.  RE: V1910 radius server Level privilege

    Posted Apr 12, 2011 04:44 AM

    Hi

     

    I have exactly the same problem.

    My switch is V1910-24G

     

    Here is my simple user file from freeradius

     

     

    testing         Cleartext-Password := "password"
                    3Com-User-Access-Level = 3

     

    The user is authenticated successfully. RADIUS sent the "3Com-User-Access-Level = 3" but stuck in view only mode after login.

     



  • 3.  RE: V1910 radius server Level privilege

    Posted May 07, 2011 11:08 PM

    Cornflag, thedesp, have you made any progress with this?

     

    I seem to be having the same issue.

    Using Server 2008 Network policy services(AKA IAS)

    HP V1910 switch

     

    I have it all set up and I can telnet to the switch and log into the web page.

    However, with telnet, the only command available is "quit".

    When I log into the web page, I get "User level is lower!110"

     

    Have tried:
    Service-Type=Administrative

    Vendor-Specific=010600000003

    Vendor-Specific=shell:priv-lvl=15

     

    in various combinations.

     

    Thanks!



  • 4.  RE: V1910 radius server Level privilege

    Posted Jun 03, 2011 02:39 AM

    Still no progress on this.



  • 5.  RE: V1910 radius server Level privilege

    Posted Jun 27, 2011 09:04 AM

    Good afternoon.
    I have the same problem. What should be sent to 3Com Baseline Switch 2920-SFP Plus (HP V1910) in Access-Accept packet to make it give a necessary privilege level? It returns at this moment the:

    <ROOT>
      <ErrorMsg>
        User level is lower!
      </ErrorMsg>
      <ErrorId>
        11
      </ErrorId>
      <BackHome>
        0
      </BackHome>
    </ROOT>


  • 6.  RE: V1910 radius server Level privilege

    Posted May 22, 2012 09:16 AM

    I did it :) I just change the radius server type from "Standart" to "Extended" and then add "Login-Service = Telnet" to radius attributes...

     

    My current working config:

    ...
    
    domain default enable system
    
    ...
    
    radius scheme system
     server-type extended
     primary authentication 172.30.192.232
     key authentication testing123
     user-name-format without-domain
    
    ...
    
    domain testdomain
     authentication default radius-scheme system
     authorization default radius-scheme system
     access-limit disable
     state active
     idle-cut disable
     self-service-url disable
    
    ...
    domain system
     access-limit disable
     state active
     idle-cut disable
     self-service-url disable

    And my current lines from freeradius users file to 3Com Baseline Switch 2920-SFP Plus:

    steve Cleartext-Password := "testing123"
       3Com-User-Access-Level = 3,
       Service-Type = NAS-Prompt-User,
       Login-Service = Telnet

     

    freeradius users lines for HP-v1910

    steve Cleartext-Password := "testing123"
       Hw_Exec_Privilege = H3C-Administrator,
       Service-Type = NAS-Prompt-User,
       Login-Service = Telnet

     and dictionary.h3c:

    VENDOR      H3C             25506
    
    BEGIN-VENDOR    H3C
    
    ATTRIBUTE   H3C-Connect_Id                    26  integer
    ATTRIBUTE   H3C-NAS-Startup-Timestamp   59  integer
    ATTRIBUTE   H3C-Ip-Host-Addr                  60  string
    ATTRIBUTE   H3C-Product-ID                     255 string
    
    ATTRIBUTE   Hw_Exec_Privilege           29 integer
    
    VALUE       Hw_Exec_Privilege           H3C-Visitor              0
    VALUE       Hw_Exec_Privilege           H3C-Monitor            1
    VALUE       Hw_Exec_Privilege           H3C-Manager          2
    VALUE       Hw_Exec_Privilege           H3C-Administrator    3
    
    END-VENDOR  H3C

     

    Now login with username steve@testdomain and you have administrator rights

     



  • 7.  RE: V1910 radius server Level privilege

    Posted Jul 06, 2012 09:18 AM

    It is config truly working

     

    Thanks for all