Join the community
Aż musiałem sprawdzić czy to nie mój post :-) Even if you define higher arp resolution limits in the configuration, you will eventually crash into hardcoded limits for RE; I haven't found any information on this topic anywhere, but it seems that around 1k/s the router...
Hi @fb35523 Thanks for your answer. Yep, that a midium sized VLAN. That is efect of many yers ignoring resizing VLANs, so now we have a such a corpse in the closet, where he began to cause problems. :) Yes. I am sure that volume traffic of scans are the same where we had CISCO. I...
So, in your example VLAN, you have almost a /19 subnet, totalling 7100 hosts, and that's a midium sized VLAN? Unless you run this as a BNG, this sounds like a stretch far beyond any logic. Creating more VLANs would be one way to go. Are you sure those volumes of scans were present when you had...
Hello, Some time ago we changed from CISCO to JUNIPER MX204. Many top people recommend this solution, so why not. And the config is almost similar to vyatta - so it can't be wrong. :) Setup is simple - two physical routers (mx204) connected and between them each vlan in VRRP and one...
I have an internal network connected by 11 HP switches ( HP1910,HP1920 and HP2620) and 2 Alcatel 6450 doing stacking at core of network. The alcatel have Layer 3 features and it was moved to become the gateway. The problem start when we moved it, i have a link to my firewall at port 1/23...
I have a strange problem with a brand new HP 5130 switch. I replaced a working Cisco 2950 with the HP 5130, I modified the Cisco configuration to use in the HP. The switch is connected to a Cisco Catalyst 3560 for the L3 layer with a Trunk Link I have a connection problem between a...